In the use of equipment, a variety of problems have arisen, both because of the equipment itself, and because of the lack of attention to construction technology.
Through FMEA analysis of the equipment, it is clear how many fault modes exist in the spray production equipment, what fault modes exist in which components, how often the faults occur, what kind of consequences will occur after the faults occur, and what kind of control is adopted for these faults. Measures and can assess whether the control measures are effective. To ensure the normal operation of on-site production equipment, eliminate equipment failures, and reduce the loss of shutdown.
Selection point
1. It can be applied in dry and humid base and humid environment.
3. The construction temperature should not be lower than -15 °C; construction in rain or snow is strictly prohibited; construction is not allowed when the third grade wind is above.
3. When using a single layer, the thickness of the application is 1.2 to 1.5 mm.
